How to Use the VapirRise2.0 Ultimate Vaporizer
Introduction
Hey guys, Michelle here from VapeFuse.com.
Today, I am going to run through how to set up and use your VapirRise2.0 Ultimate.
Content
The VapirRise is a forced air desktop vaporizer and it is the most versatile unit on the market today.
You have both Whip and Balloon functionality, plus you can use either dry herbs or oils. It is equally effective in vaping both.
Now, when you unpack your box, these are all the parts and accessories you are going to see:
- You’ll have a Dry Herb Chamber and
- an Oil Chamber
- an Adapter
- a Single-User Whip Head
- a Multi-User Whip Head
- a Hot Chamber Grabber
- 3 Inflation Balloons
- 1 Air filter
- 2 (1m) Silicone Whip Tubes
- 4 X-Tip Mouthpieces
- a Cleaning Brush
- a User Guide and
- a Quick Start Guide
Now, when you are ready to get started you will need to firstly plug in your machine. The power switch is located on the back of the unit and you can just flick it on. You will see all the controls light up.
Before you start playing with the settings and heating up your device, now is a good time to prepare your herbs and fill up the herb chamber.
Then click the chamber onto the adapter and place the adapter into the unit. You will need to select either the single user or multi-user top.
Next, set your temperature. You can now hit the ‘Heat’ button and you will notice the ‘Heat’ button will turn red, indicating that the unit is now heating. At this point, you may wish to set your fan speed to zero, so the unit is not using the fan while heating up. It takes less than a minute to heat up so while we wait I will construct the whip.
Take the inhalation adapter and attach it to one end, then attach the mouthpiece to the other end. I am then going to join the adapter to the device by screwing it into the opening like this. Once the heat light switches turn from RED to GREEN you know you are ready to vape.
And that’s it you are ready to go, basically.
Now with the VapirRise2.0 Ultimate, there are a few other cool features I want to show you before I go.
First, we have “The Hot Chamber Grabber”. If you want to change the herbs out the chamber you have to be super careful because it will be really hot after you have used it.
So, what you will need to do is twist the chamber to the left and lift it out, then take the grabber and place it on the bottom and pop it out. It’s as simple as that! You can then reload without burning yourself.
Next, we have “The Balloon System”. So the balloon system is also a great function which you can enjoy your herbs with. Fix the whip to the single user head and then place the other end into the balloon. It holds on pretty tight.
When the balloon is fully inflated with your herb combo vapor, you can hit the heat button to switch off the fan. You can inhale directly from the balloon or through the whip.
Lastly, and I have saved the best for last “The Multi-user Adapter”. This device is the only one on the market which provides a 4 person whip adapter for a better vaping experience.
Like setting up a single whip adapter, you will follow the same steps by adding tubing to each section. Then attached the adaptor by clipping it on to the opening like so, now you and your friends are ready to go. You can have one whip filling up a bag, while you and 3 friends are using the whips.
It’s all possible with the VapirRise2.0 Ultimate.
And that’s it from me guys, thank you for watching this video and we hope to see you soon again on VapeFuse.com.
